1996 BMW 318IS INSTRUMENT CLUSTER REPLACE WITH 96 M3 CLUSTER. Possible?

10-20-2007

I've been looking and I have had no success. My current instrument cluster doesn't work anymore so i have found a replacement one from a 1996 bmw m3 coupe. Was wondering if i would have to modify anything to get it to work. I have a 1996 BMW 318is (coupe). I am pretty sure it will work but im just double checking.

10-20-2007

If you were able to look at the back side of your 318i instrument cluster, you might be able to sketch the layout of the wiring harness and the number of connectors to be dealt with. If the connectors have the right pin count and long enough wires to reach each connector receptacle, your proposed panel switch just might work. What is the difference in the clusters besides the tachometer? How many cylinders does your 318i have?

10-20-2007	#1 (permalink)
John Smith Guest Posts: n/a	1996 BMW 318IS INSTRUMENT CLUSTER REPLACE WITH 96 M3 CLUSTER. Possible? I've been looking and I have had no success. My current instrument cluster doesn't work anymore so i have found a replacement one from a 1996 bmw m3 coupe. Was wondering if i would have to modify anything to get it to work. I have a 1996 BMW 318is (coupe). I am pretty sure it will work but im just double checking.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How much would it cost to replace the back bumper on a 1996 nissan pathfinder SE?	cpailler	Nissan	0	10-23-2007 06:55 AM
Hello, I have just been quoted $900 to replace the muffler system on my 1997	debhosc	Subaru	0	10-23-2007 06:32 AM
Replace Dodge Caravan third row seat.?	CoolDude	Dodge	1	10-18-2007 04:50 PM
how do i know if i need to replace a starter or flywheel on 1985 bmw?	Sol	BMW	0	10-18-2007 08:26 AM

10-20-2007	#2 (permalink)
Phillip S Guest Posts: n/a	If you were able to look at the back side of your 318i instrument cluster, you might be able to sketch the layout of the wiring harness and the number of connectors to be dealt with. If the connectors have the right pin count and long enough wires to reach each connector receptacle, your proposed panel switch just might work. What is the difference in the clusters besides the tachometer? How many cylinders does your 318i have?