i need to know how to torgue the head bolts on a 3.0 ohv 2001 ford taurus?

10-21-2007

please help ?
the lbs per bolt

10-21-2007

You'll need to find the specific ft/lb ratio you need to torque them to. After that, get a torque wrench with a 1/2" extension and a socket that fits the bolts, and tighten it until the torque wrench reads the proper torque. Let the tension off of the wrench, and then re-check the torque. This will get you the proper torque.

EagleAutosports · 06-12-2008

You should get a manual on this, that would have the torque specs for the engine.

10-21-2007	#1 (permalink)
Jonny Guest Posts: n/a	i need to know how to torgue the head bolts on a 3.0 ohv 2001 ford taurus? please help ? the lbs per bolt

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can i put a stereo in a ford taurus?	luis v	Ford	3	06-12-2008 07:34 PM

10-21-2007	#2 (permalink)
Corvo Guest Posts: n/a	You'll need to find the specific ft/lb ratio you need to torque them to. After that, get a torque wrench with a 1/2" extension and a socket that fits the bolts, and tighten it until the torque wrench reads the proper torque. Let the tension off of the wrench, and then re-check the torque. This will get you the proper torque.

06-12-2008	#3 (permalink)
EagleAutosports Site Administrator Join Date: Apr 2008 Location: Mebane, North Carolina, USA Posts: 229	You should get a manual on this, that would have the torque specs for the engine.